minisert-5-range-700x1020Minisert Spec’s and Spares

Limitations and Warranty

Please Note the following

Guaranteed by Austral Tools for 2 years from purchase.

Damage caused by exceeding maximum torque settings Voids Warranty

Drive torque beyond the limits specified above will damage the Rivnut, Mandrel or Tool

Use of Impact wrenches is expressly forbidden

Spare parts available from stock

NM = Torque measured in Newton Meters

Conversion Factors

  • To convert NM to Kg M multiply by 0.102
  • To Convert NM to Foot Pounds multiply by 0.738

Torque Setting

Note – A rivnut is secured more by the body expanding radially against the panel hole than by clamping.  Therefore the panel hole must be round and a close fit to the body. Excess clamping force will NOT lead to a permanent fixture

When setting a Rivnut the Tension required (and hence the driving Torque) has a peak when the body just starts to bulge and again as the body is compressed against the panel.

Therefore – The force applied to the set screw as the rivnut compresses against the panel – should be no greater than the tension required to initially bulge the body.

Using Percussion Tools or Applying torque in excess of the Maximum Permitted will tear the thread out of the rivet  nut,  may damage the tool and void all warranties.

Spare Parts

Description                 Part #                Cart

M4 Mandrel                         ATMSM-M4             Buy

M5 Mandrel                         ATMSM-M5             Buy

M6 Mandrel                         ATMSM-M6             Buy

M8 Mandrel                         ATMSM-M8             Buy

M10 Mandrel                       ATMSM-M10           Buy

Set Screw M8 x 2                ATMSScrew             Buy

13mm Ratchet Spanner   ATRSpan130           Buy